Eight precautions for anti-counterfeiting of the h

2022-08-14
  • Detail

Editor's note: if we say that the "three disciplines" of food anti-counterfeiting is an ideological warning to enterprises on how to prevent counterfeiting. Then, this "eight points of attention" refers to the anti-counterfeiting practice, which is the specific operating rules for accelerating the introduction and industrialization of high-end and sophisticated technologies under the guidance of the basic principles

note 1. The anti-counterfeiting technology product "inspection certificate"

anti counterfeiting technology product is a special commodity. Since it is a commodity, it must involve quality problems. When choosing products provided by anti-counterfeiting companies, enterprises, like all purchasing behaviors, should pay attention to product quality as the first step. Before the promulgation of the measures for the supervision and administration of product anti-counterfeiting (hereinafter referred to as the measures) on December 1, 2002, the specific regulation regulating anti-counterfeiting technology products was the measures for the administration of anti counterfeiting technology products (Trial) (hereinafter referred to as the trial), which did not make specific requirements for the quality inspection of anti-counterfeiting technology products. In other words, before the introduction of the measures, anti-counterfeiting technology products were in a state of "one willing to sell, one willing to buy". However, since December 1st, 2002, all anti-counterfeiting technology products publicly promoted in the market must pass the quality inspection of legal inspection institutions and pass the quality inspection. At present, there are only two designated inspection institutions, one is the "anti-counterfeiting technology product quality inspection center" directly under the State Administration of quality and technical supervision, and the other is the "national printed matter quality inspection center" located in Tianjin. When an enterprise sees the anti-counterfeiting technology products promoted on site, it should first check whether it has the "quality inspection certificate" issued by one of the above two designated inspection institutions

note 2 "technical evaluation certificate" of anti-counterfeiting technology products

if the product "quality inspection certificate" is the identity certificate that all commodities should have, then the "technical evaluation certificate" is the exclusive and special identity certificate of anti-counterfeiting technology products. The essence of anti-counterfeiting technology products is quality assurance, and anti-counterfeiting behavior is a kind of quality assurance behavior, so it must have the conditions for quality assurance. Only after being evaluated and examined by a special authoritative technical organization, can a "technical evaluation certificate" be obtained if a clear appraisal conclusion is made on whether it can prevent counterfeiting and how to prevent counterfeiting. At present, when the national designated legal evaluation organization (d1+ D2) is less than 12, the dimensional deviation and appearance quality are qualified; There is only one, the China anti counterfeiting Industry Association. In addition, no organization, group or institution is qualified for legal review. When examining the evaluation certificate of the anti-counterfeiting company, the enterprise must verify the name of the evaluation organization, evaluation opinions, validity period, etc

note 3 "production license" of anti-counterfeiting technology products

with the development of market economy, In many business areas, the state has successively cancelled the license from 20% of the rated load (for example, 20% of 2000kN press is 400.0kn), gradually reducing the scope of license management, but anti-counterfeiting technology products have been newly included in the scope of license management. Some people put the "measures" The license system stipulated in is called a reshuffle of the anti-counterfeiting industry. With the implementation of the license system, a large number of anti-counterfeiting enterprises will be blocked out of the door and forced to withdraw from the anti-counterfeiting industry. To apply for a production license, you must get a technical evaluation certificate. To apply for a technical evaluation, you must first have a "quality inspection certificate", which can be described as "three certificates in one, linked together". From inspection, evaluation to obtaining a license, any anti-counterfeiting technology product must go through "three passes" before entering the market

note 4 environmental protection inspection "certificate of conformity"

this is a special inspection. As an anti-counterfeiting enterprise, you can choose environmental protection inspection or give up environmental protection inspection. If it abandons environmental protection inspection, it means that the enterprise may also abandon customers in food, alcohol, drugs, clothing, cosmetics and other industries. Because these major categories of anti-counterfeiting users must or should see its environmental protection certification when choosing anti-counterfeiting technology products. The measures did not specify the qualification of environmental protection certification bodies, but pointed out that environmental protection certification can only be issued by institutions with certification qualifications specified in the environmental protection law

note 5: the quality and technical supervision department needs to file.

the measures have made unified filing requirements for users who use anti-counterfeiting technology products, but in practice, some enterprises choose not to file. In fact, the advantage of filing is that the local quality and technical supervision authority can know whether you use anti-counterfeiting technology, what technology you use, when you start to use it, what products you use, and what methods you use for inspection and identification. The main function of filing is to facilitate government supervision in order to combat counterfeiting

Note 6. Service life of anti-counterfeiting technology products

any product has its life cycle of growth, maturity and decline, and anti-counterfeiting technology products are of course no exception. If a product with a market life cycle of more than ten years chooses an anti-counterfeiting technology product with an anti-counterfeiting life of only two years, it will inevitably bring a disaster to the enterprise. It is impossible for enterprises to change an anti-counterfeiting technology product every two years, so as to prevent the convergence of various anti-counterfeiting methods of products circulating in the market after a few years, which will dazzle consumers and make it difficult to distinguish the true from the false

there are two methods to distinguish the anti-counterfeiting life of anti-counterfeiting technology products: formal judgment and substantive judgment. Formal judgment is to check its license, review certificate and quality inspection certificate. These certificates all indicate the period of validity, especially the technical review certificate, which is more likely to directly explain its anti-counterfeiting life. The most important thing is substantive judgment, which requires the participation of experts, and even organize argumentation, appraisal or consultation with authoritative institutions

note 7 whether it meets the public identification

there are many classification methods for anti-counterfeiting technology, one of which is to divide it into expert anti-counterfeiting and public anti-counterfeiting according to the identification subject. The so-called expert anti-counterfeiting means that this method can only be used, identified and identified by experts with professional knowledge and expertise; The so-called public anti-counterfeiting, of course, refers to the anti-counterfeiting methods that can be used, identified and identified by ordinary people in different regions, ages, occupations, cultures and industries. Obviously, a brand enterprise that provides products for many consumers must choose the anti-counterfeiting method that can be used and recognized by ordinary people. Expert anti-counterfeiting can only be applied to special industries and special products. We should be particularly vigilant here and not be confused by various anti-counterfeiting methods under the banner of fancy "technology"

note 8 reject traditional anti-counterfeiting another article on PEUU heart valve failure

what is traditional anti-counterfeiting? In terms of anti-counterfeiting concept, anti-counterfeiting technology can be divided into "modern anti-counterfeiting" and "traditional anti-counterfeiting". Traditional anti-counterfeiting is what meets the following four characteristics: A. technical confidentiality: trying to make their own anti-counterfeiting methods continue to be effective with the help of "let others never understand"; B. Equipment control: the equipment that can produce certain anti-counterfeiting technology products is "unique, and there is no other branch", and I hope that others will never own this kind of equipment; C. Material monopoly: the raw materials that can produce certain anti-counterfeiting products are monopolized by him and cannot be obtained by others; D. Use ABC three items in a comprehensive way or a variety of anti-counterfeiting methods in a comprehensive way, thinking that counterfeiters will give up counterfeiting if they think the cost is too high

in fact, the above four means may be effective in the initial stage, but a large number of facts have proved that their anti-counterfeiting life is short, and will soon be mastered and used by counterfeiters

source: new food

Copyright © 2011 JIN SHI